Blogroll

Powered by Blogger.

Saturday 5 July 2014

7407 - Hex Buffer / Driver with 30 V Open Collector Outputs, Pinout Diagram

by realfinetime  |  in TTL at  04:23

                One of the main drawback of TTL ICs are, output voltage will be in the range of 5 volts. So the outputs of these ICs cannot be used to drive high current loads such as lamps or relays. 7407 ICs are normally used in such situations. These devices perform the boolean function Y = A in positive logic, which means if the input is at logical HIGH, output will be at logical HIGH. Similarly, if the input is at logical LOW, output will be at logical LOW. But the magnitude of input and output voltage will be different. Input voltage will be 5.5V. But the output voltage will be 30V. Pinout diagram of 7407 IC is given below.



Features of 7407. 

1. Convert TTL Voltage Levels to MOS Voltage Levels.
2. High Sink Current Capability.
3. Inputs Fully Compatible With Most TTL Circuits.
4. Clamping Diodes at Input Simplify System Design.
5. Open-Collector Driver for Indicator Lamps and Relays.

Truth Table of 7407.
Supply Voltage, Input Voltage and Output Voltage of 7407 are 7V, 5.5V and 30V respectively.

Read more :


0 comments:

IMPORTANT NOTICE

All the circuits, published in this blog is only after testing and getting proper results in my private lab. When you try these circuits, you should check the supply voltage, polarity of components, presence of childrens nearby and shorts in the circuits. This website will not be responsible for any harm happened to you or your components caused by your carelessness.

For More Electronic Tips



Blog Archive

Proudly Powered by Blogger.