Powered by Blogger.

Sunday 14 September 2014

Complete Arduino Program to Display "HE" in a 16*8 LED Matrix (Part 13 of 13)

by realfinetime  |  in LED Matrix at  11:10

<<<<  Read previous part (Part 12)

          We had already created the programs to create frames for "HE" display in the past few blogs. Next is to create a program that will display all these frames one after another at a high speed which will give a "HE" feeling to our eyes because of persistence of vision. This program is a combination of all the programs that generate individual frames. Display will be as shown below.

          Complete the circuit given in this page. Download the complete program from the following box and upload it to your arduino board.
          "HE" will be displayed in your 16*8 LED matrix. Brightness of LEDs will be less. A simple trick is used to increase the brightness. This trick will be seen in coming blogs.

Technique to Increase Brightness of 16*8 LED matrix  >>>>



All the circuits, published in this blog is only after testing and getting proper results in my private lab. When you try these circuits, you should check the supply voltage, polarity of components, presence of childrens nearby and shorts in the circuits. This website will not be responsible for any harm happened to you or your components caused by your carelessness.

For More Electronic Tips

Blog Archive

Proudly Powered by Blogger.