<<<< Read Previous Part (Part 3)
We had already seen the internal circuit of 2*2*2 LED cube in the last blog. Here, we will make some modifications in the circuit to turn on LED 3 only.
If the circuit is done as given above, LED 3 will turn on. Positive terminal of 5V cell is connected to the anode terminals of LED 1, LED 2, LED 3 and LED 4 through a current limiting resistor of 1K. Negative terminal of 5V cell is connected to the cathode terminals of LED 3 and LED 7. From these two connections, we can conclude that the only LED which get both positive and negative voltages is LED 3. This will turn on LED 3.
We had already seen the internal circuit of 2*2*2 LED cube in the last blog. Here, we will make some modifications in the circuit to turn on LED 3 only.
If the circuit is done as given above, LED 3 will turn on. Positive terminal of 5V cell is connected to the anode terminals of LED 1, LED 2, LED 3 and LED 4 through a current limiting resistor of 1K. Negative terminal of 5V cell is connected to the cathode terminals of LED 3 and LED 7. From these two connections, we can conclude that the only LED which get both positive and negative voltages is LED 3. This will turn on LED 3.
Continued in Next Part (Part 5) >>> |
You have a genuine capacity to compose a substance that is useful for us. You have shared an amazing post about Test And Tag Adelaide.Much obliged to you for your endeavors in sharing such information with us.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteI generally check this kind of article and I found your article which is related to my interest. Genuinely it is good and instructive information. Thankful to you for sharing an article like this.Led screen panel india
ReplyDelete